Expert Answers about John Deere

• Adapting a Fulton Fold Away Bolt On Hinge Kit to Fit on a 2 1/2" Tongue
• Yes, the Fulton Fold Away Bolt On Hinge Kit item # FHDPB230101 will work for your trailer. According to Fulton you will need to fabricate a metal or steel spacer as a shim to fill the gap between the tongue and the hinge.
  view full answer...


• Winch Mount for a 2016 John Deere 590i Gator XUV
• I contacted my tech contact at Bulldog Winch and he told me the Custom-Fit Steel Winch Mount # BDW15175 is confirmed to fit on your 2016 590i John Deere Gator XUV. I attached a review video of this winch mount you may want to check out. If you are in need of a winch, I recommend the Bulldog Winch 1.9 HP Powersports Winch # BDW15022. This winch has a weight capacity of 6,000 lbs. This winch has a permanent magnet motor and uses a 50' wire rope. The handheld remote cable is 15' long and...
  view full answer...


• Quick Connect Wiring Harness for a Superwinch 4,500K Electric ATV Winch
• In order to install a quick connect winch wiring harness on both the front and rear of your 2016 John Deere Gator 825i, I recommend using the Bulldog Winch Wiring Kit part # BDW20205. You will need 2 harnesses, 1 for the front of the ATV and 1 for the rear of the ATV. The harness wires directly to your battery and can support winches up to 95 amps which is more than enough for the 21 amp rating of the Superwinch Terra Series ATV Winch part # SW1145220. Each cable end on the wiring harness...
  view full answer...


• Custom Winch Mount For Mounting etrailer ATV Winch To 2014 John Deere Gator 825i
• To mount the etrailer ATV Winch - Synthetic Rope - Hawse Fairlead # e98988 to your 2014 John Deere Gator 825i you can use Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15171 which is custom fit for your Gator, and my contact at Bulldog confirmed it will work with the 3.18" x 3.18" mounting bolt pattern of the # e98988. I included a video of the etrailer # e98988 for you to take a look at.
  view full answer...


• 2018 John Deere Gator XUV 835 Trailer Wiring Harness Recommendation
• The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11140585 is designed for the following vehicles: - 2008 - 2009 Mercury Sable - 2008 - 2009 Ford Taurus Sedan Since there aren't any custom fit harnesses for your 2018 John Deere Gator XUV 835 I recommend using the following universal parts: - Curt Powered Tail Light Converter # C59236 - Deka Heat Shrink Butt Connectors # DW05744-5 The heat shrink butt connectors will be used to replace the quick-splice connectors since these...
  view full answer...